Toolbox - Settings Dialog Box: Hardware¶
Use the Hardware category of the Toolbox - Settings dialog box to specify settings for bolts and screws, nuts, pins, and washers you add to drawings.
To access annotation settings:
Do one of the following:
On the ribbon, select Mechanical Content > Settings.
On the menu, click Mechanical Content > Settings.
On the Mechanical toolbar, click Settings
.
In the Toolbox - Settings dialog box, click Hardware.
To modify hardware settings during creation:
Do one of the following:
On the ribbon, select Mechanical Content > Hardware > Insert.
On the menu, click Mechanical Content > Hardware > Insert.
On the Mechanical toolbar, click Hardware Insert
.
Type AM_Hardware.
In the Toolbox - Hardware dialog box, select a hardware category and click Settings.
Specify settings and click OK to return to the Toolbox - Hardware dialog box to configure and insert hardware components.
General
The following settings are available for all categories of hardware:
Option |
Description |
|---|---|
Create as block |
Creates the hardware component in the drawing as a 1:1 block. When cleared, the hardware component is created as an individual entity. It is recommended that you select Create as block so that Toolbox recognizes the component when you edit the entity or create a bill of materials. |
Verify BOM |
Opens the Toolbox - Verify Bill of Materials Data dialog box when you click OK. Use this dialog box to verify or modify the part description and specify a part number. |
Access
Toolbox - Settings dialog box: click Hardware
Toolbox - Hardware dialog box: click Settings
Related Topics
Toolbox - Settings Dialog Box: Annotations
Toolbox - Settings Dialog Box: Holes
Toolbox - Settings Dialog Box: Tables
Parent Topic